Septic Tank Installation ServiceSeptic Tank Installation in Woodstock & North Atlanta GA
The Best Septic Tank Installation In North Atlanta GA
Septic tanks are a must for any Atlanta home existing far from the inner-city sewage network. When your waste cannot be disposed of directly through the city’s waste-management systems, you may need to consider septic tank installation for your household plumbing needs.
Installing a septic tank is an expensive endeavor that requires expertise and land permits to work sufficiently. Even if you are removing an old tank in place of a new one, you must meet specific criteria. This article will take you through everything you need to know regarding septic tank installation such as:
- What is a septic tank, and how does it work?
- Benefits of using a septic tank over municipal sewer grid
- The septic tank installation costs
- And why you should trust The Original Plumber for all your septic tank repair and installation
If your home isn’t connected to city water or your waste cannot be disposed of through city wastewater treatment sewer lines, you will need a septic tank to eliminate effluent waste and solids. Septic tanks are made of fiberglass, plastic, or concrete and are situated beneath your property, where pipes pull wastewater into the reservoir.
Here, waste separates into three parts: sludge, liquids, and scum. Sludge is made up of solid waste, while scum is separated oils and particles that are less dense than the water and therefore float to the top.
The bacteria within septic tanks grow and decompose the materials inside. As the tank fills, the solid waste decomposes, and liquid waste flows through the second PVC pipe that pushes fluid out the other side of the tank. The liquid waste is further cleaned through a small system of drain fields that provides percolation. This system can involve a leach field, gravel, bedrock, layers of sand or silt, a trench, or other features depending on the type of new septic system installation and septic pump you have.
Why You Need a Septic Tank Installation
Septic tanks are designed to take care of the household waste on a property not connected to the city water-management grid. If your waste cannot be disposed of via sewage network systems and waste-decomposition facilities, you will have to use a septic tank to store and decompose the waste outside of your home.
Benefits of a Septic Tank
- Septic tanks are environmentally friendly
- They utilize far less energy to decompose your waste
- They can save you money in the long-run
While you will have to pay for yearly cleaning, you save money from paying for sewage treatment and city water usage.
The Best Septic Tank Installation Near Atlanta GA Area
Whether you’re looking to install a brand new septic tank, replace an old one, or simply need an expert eye for septic tank inspection to provide maintenance suggestions, The Original Plumber contractors in Atlanta, Georgia, are always here to help.
Septic tanks are a tricky setup with several vital steps in their installation process. It’s essential to know all of the proper codes for septic tank installation, from permits to state regulations. If you’re a new homeowner looking to install a septic tank on your property, it’s best to contact a professional who understands your state’s rules and regulations.
Additionally, septic tanks can’t be set up and installed by the average person. The systems require expert knowledge and years of experience to ensure everything is put in correctly and runs smoothly. If you’re ready to install your septic tank, contact us at (888) 611- 5079 to get a free estimate of your installation and schedule an appointment.
To gain a greater understanding of the services we provide, read the steps below on how to go about installing a septic tank on your property correctly.
Septic System Installation Process
Installing septic tanks can be a lengthy process and requires the help of experienced professionals. As you may know, septic tanks exist below your property. Since they are underground, the area where the septic tank will be placed must be dug up for installation. This is a costly process best overseen by experts.
Overview of the Steps to Take
- Receive a percolation test
- Permit by the Department of Health
- Excavation and Installation
Below is a thorough explanation of each step in the process to help you better understand what to expect when installing a septic tank on your property.
Receive a Percolation Test and Inspection
The first step that will need to be performed is a percolation test on the property. A percolation test is essentially a method of testing water’s ability to drain through the soil, known as zone saturation or the water table. The county’s health department establishes the necessary regulations to determine whether your soil will pass or fail the test. Therefore, a health department official must be present for the test.
A licensed professional will likely perform the test for you and go over the results. It is essential to know that each county is different and follows unique procedures. It’s also important to note that percolation tests will need to be performed every two to five years for upkeep on the system.
Building Permit Application
Once you have your percolation test results, you can begin moving on to the next step. If your results are negative, there’s no need for alarm. You may need to consult the department of health on an alternative solution to your septic tank.
However, if your percolation test is positive, you can begin the process of installing the septic tank on your property. You will need to acquire a building permit to install the tank. While each county is unique, you can often apply to the Department of Health and Environmental Control via their online septic tank application.
Excavation and Installation of Septic Tank and Pumps
Once you have obtained your permit, you can begin contacting your local septic tank installation company for excavation and installation. Depending on your property and your septic tank system’s size, you can expect to spend at least $1500 to upwards of $3000. The number of piping connections within your home, as well as the ease at which they can be accessed, will also play a significant role.
Septic Tank System Installation Costs
As mentioned above, septic tank systems come in a wide range of prices. Depending on the area you live in, your percolation test results, the type of tank you choose, and who you work with to install your septic tank, you can expect to spend a couple of thousand dollars.
Types of Septic Tank and Drain Field Systems
There are several types of septic tank systems to choose from, and most are dependent on the type of land your property rests on. Some septic tank systems, like the Mound System, are put in with the mound in mind. Mound systems often reside beneath a slope and use a series of risers and lids along with the help of gravity to dispose of waste.
Community systems are also popular for shared septic tanks by closely related properties. They require more depth and extensive polyethylene-coated piping.
Here are the common types of septic tank systems:
- Standard Septic Tank
- Conventional Septic System
- Chamber System
- Drip Distribution System
- Mound System
- Constructed Wetland System
If you want a full range of the types of septic tank systems available to you, you can check out the EPA’s article on the different septic tank systems commonly used by homeowners.
Types of Septic Tanks
Septic tanks are often made of fiberglass, plastic, concrete, or steel. The septic tank itself is meant to hold waste and wastewater without eroding too quickly over time. Plastic tanks and concrete are the two most common types and have a wide variety of differences. However, if you are confused about the difference between a septic tank and a septic tank system, think of the entire unit as a cardiovascular system. The septic tank itself is the heart, and the piping and other features are the veins.
Review of types of tanks to choose from:
- Fiberglass septic tanks
- Plastic septic tanks
- Concrete tanks
- Steel tanks
Septic Tank Size and Gallons
Depending on your preference and your septic tank size, you will have to choose a tank type that suits your needs. Larger tanks will be more expensive. For people who have in-home laundry, multiple showers, toilets, a number of bedrooms, or a separate guest bedroom house, you can expect to spend more on installation. You will also require a larger gallon tank for homes of this size. Consult with an expert if you are unsure.
Septic Tank Installation Contractors
If you live near Atlanta, The Original Plumber can be an excellent choice for septic tank installation. We are experts in our field and understand that installing a septic tank is a significant investment that requires an expert’s wherewithal. We are available seven days a week to aid in any septic services you may need.
The experts at The Original Plumber have over twenty-five years of professional experience installing, maintaining, and cleaning septic tanks. We offer several plumbing services and have the knowledge and expertise to provide a safe, reliable, and attentive service. Your plumbing system is one of the most vital portions of your home. If done improperly, you could be looking at costly fixes.
Our goal is to save you money and time in the long-run by providing plumbing services that follow every code and meet all of the winning criteria to provide you with a safe and efficient home. If you need septic tank installation or maintenance services, we’re here to help you every step of the way.
If you want a free estimate for your septic tank installation in the North Atlanta, Georgia region, we’d be happy to help you out. Call us at (888) 611-5079 today to schedule an appointment or get a free estimate of what your septic tank might cost for your property.
We are ready to serve you